2Gig Go Control Instructions

Dorney Security Systems User Guide

Change Your Master Code
To change the master code on your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox > User Codes. Enter your current master code.
2. The screen will then display a list of 8 codes; choose the code you want to change by touching it.
3. Type in a new four-digit number to change your master code.

Enable and Disable Chime Function
To turn on the chime on your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox (page 1 of 3) > Chime Setup.
2. Enter your master code.
3. A list of zones will appear. For each zone, you can turn on a chime tone of your choice.
OR
1. Press Security > Menu.
2. There will be a checkbox with the word Chime next to it. To turn on chime for every area of your home, make sure there is a check in the box.
Turn On or Off the Voice Option
To turn on the voice on your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox.
2. On the Menu page, check or uncheck the box next to voice.

Bypass Sensors

To bypass a sensor using your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox (page 1 of 3) > Bypassed Sensors.
2. Enter your master code. A list of zones will appear.
3. Press on the zone you want to bypass; an icon will appear, showing you the action has been completed.
OR
To unbypass all of your zones, complete the following steps:
1. Press Security > Menu > Toolbox (page 1 of 3)
2. Check the box next to Unbypass All.
Adjust System Volume or Brightness
To turn up the volume on your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox (page 1 of 3) > Brightness/Volume.
2. Using the speaker icons, you can increase or decrease the volume of your panel. You can also turn your brightness up or down from this location.

Set the Date and Time
To set the date and time on your Dorney Security Systems Go!Control panel, complete the following steps:
1. Press Security > Menu > Toolbox (page 2 of 3) > Set Date and Time.
2. Using the arrow buttons, set the date first then push Next.
3. Using the arrow buttons, set the time.

4. Enter OK twice.

Call us Today and Sleep Safer Tonight! (915) 584-4526

poweredby_WhiteOrange_dot